10 Steps on How To Fix Internet Connection on Windows 10 and 11

10 Steps on How To Fix Internet Connection on Windows 10 and 11

SCHEDULE A 15 MINUTE CALL

 

Introduction

 

Are you struggling with the “No Internet Connection” error on your Windows 10 or 11 PC? Want to know how to fix internet connection on Windows 10 and 11? Rest assured, you’re not alone! Internet connection problems can be quite frustrating, but they are usually resolvable with some straightforward solutions. In this guide, we’ll outline ten troubleshooting steps to assist you in restoring your online access quickly. From checking your network cables to resetting your network settings, we’ll cover everything you need to know. So, grab your computer, and let’s dive into how to fix internet connection on Windows 10 and 11!

 

Step 1: Check Your Network Cables and Connections

 

In how to fix internet connection on Windows 10 and 11, the initial troubleshooting step involves checking all network cables and connections. Begin by ensuring that your Ethernet cable is firmly connected to both your computer and your router or modem. For wireless connections, confirm that your wireless adapter is enabled and that you’re connected to the correct Wi-Fi network.

 

If the cables and connections are fine but you’re still experiencing problems, try restarting your router or modem. Sometimes, a simple reset can resolve connectivity issues. Additionally, updating your network adapter drivers can help ensure compatibility with the latest Windows updates and improve overall performance.

 

If these steps don’t solve the problem, you may need to troubleshoot further by checking your network settings, running the Windows Network Troubleshooter, or resetting your network settings. Remember to restart your computer after making any changes to apply the fixes effectively.

 

Step 2: Restart Your Router and Modem

 

Sometimes, all it takes to fix internet connection issues is a simple restart of your router and modem. Turn off both devices, wait for about 30 seconds, and then turn them back on. This can often resolve temporary glitches that may be causing your connection problems.

 

Step 3: Run the Network Troubleshooter

 

In how to fix internet connection on Windows 10 and 11, utilize the built-in Network Troubleshooter. Access it by navigating to Settings > Network & Internet > Status, then click on “Network Troubleshooter.” This tool can automatically diagnose and resolve common network problems, providing step-by-step instructions along the way.

 

If the troubleshooter fails to resolve the issue, consider updating your network adapter drivers. Outdated or incompatible drivers can cause connectivity problems. To update your drivers, right-click on the Start button, select “Device Manager,” expand the “Network adapters” category, right-click on your network adapter, and select “Update driver.”

 

If you’re still experiencing issues, resetting your network settings to their default state can often fix stubborn connection problems. Go to Settings > Network & Internet > Status > Network reset, and follow the on-screen instructions.

 

Step 4: Update Your Network Adapter Driver

 

Outdated or corrupted network adapter drivers can cause internet connection problems. To update your network adapter driver, right-click on the Start button and select “Device Manager.” Expand the “Network adapters” section, right-click on your network adapter, and select “Update driver.” Follow the on-screen instructions to update the driver.

 

Step 5: Reset Your Network Settings

 

If you’re still encountering internet connection problems on Windows 10 after you learned how to fix internet connection on Windows 10 and 11, resetting your network settings can often resolve the issue. To do this, navigate to Settings > Network & Internet > Status, and select “Network reset.” This action will reset all network adapters on your computer to their default settings. Keep in mind that this will also remove any network profiles you’ve configured, so you’ll need to reconnect to your Wi-Fi network afterward. Resetting your network settings can be a useful step if other troubleshooting methods have not resolved your connectivity problems, as it can help clear out any configuration issues or conflicts that may be causing the issue.

 

Step 6: Check Your IP Address Settings

 

Incorrect IP address settings can sometimes cause internet connection problems. To check your IP address settings, open Command Prompt and type “ipconfig /all” (without quotes) and press Enter. Look for the “IPv4 Address,” “Subnet Mask,” and “Default Gateway” entries. Make sure they are correct for your network. If not, you may need to manually set your IP address settings.

 

Step 7: Disable IPv6

 

How to fix internet connection on Windows 10 and 11, disabling IPv6 can potentially resolve internet connection problems on Windows 10 and 11 for some users. To disable IPv6, navigate to Control Panel > Network and Sharing Center > Change adapter settings. Right-click on your network adapter and select “Properties.” Locate “Internet Protocol Version 6 (IPv6)” in the list, uncheck the box next to it, and click OK. This action will deactivate IPv6 on your network adapter, prioritizing IPv4 instead. Keep in mind that while disabling IPv6 might help in certain situations, it’s generally recommended to leave it enabled unless you have a specific reason to disable it, as IPv6 is essential for the future of internet connectivity.

 

Step 8: Disable Proxy Settings

 

If you’re using a proxy server, it may be causing internet connection problems. To disable proxy settings, go to Settings > Network & Internet > Proxy, and turn off the “Use a proxy server” toggle switch.

 

Step 9: Check for Malware

 

Malware can indeed disrupt internet connectivity on Windows 10. To address this, perform a full system scan using your antivirus software. This scan will detect and eliminate any malicious software that might be affecting your network connection. 

 

So how to fix internet connection on Windows 10 and 11? If you don’t have antivirus software installed, Windows Defender, which is built into Windows 10, can be used. To run a scan with Windows Defender, go to Settings > Update & Security > Windows Security > Virus & Threat Protection. Click on “Scan options” and select “Full scan,” then click “Scan now.” 

 

After the scan is complete, follow any prompts to remove or quarantine any threats found. Restart your computer and check if your internet connection has been restored.

 

Step 10: Contact Your Internet Service Provider

 

If you’ve tried all the above steps and are still experiencing internet connection issues, it may be time to contact your internet service provider (ISP). There may be a problem with your connection that requires their assistance to resolve.

 

Conclusion

 

Internet connection issues on Windows 10 and 11 can be frustrating, but they’re often fixable with a few simple steps. By following the 10 troubleshooting steps outlined in this guide, you can diagnose and resolve common network problems and get back online in no time. Remember, if you’re still experiencing connection issues after trying these steps on how to fix internet connection on Windows 10 and 11, don’t hesitate to contact your ISP for further assistance.

 

About Bytagig

Bytagig is dedicated to providing reliable, full-scale cyber security and IT support for businesses, entrepreneurs, and startups in a variety of industries. Bytagig works both remotely with on-site support in Portland, San Diego, and Boston. Acting as internal IT staff, Bytagig handles employee desktop setup and support, comprehensive IT systems analysis, IT project management, website design, and more.

Share this post:
No Comments

Sorry, the comment form is closed at this time.